Golf Course Maintenance: Proven Technology, Semi-Autonomous Systems, and New Electric Solutions
Partially autonomous mowing of slopes, quieter transport, and reduced workload for staff: IMG presents electric and partially autonomous solutions for greenkeepers—from the Raymo robot to the TYN-e transporters, which will be available on the market starting in 2027
The ISEKI SF551 with a Müthing mower (also available with a cab) in action on the golf course: mowing and collecting in a single passThe first flight tees off at eight, and by then the roughs, banks and paths have to be done. At the same time, many courses are short of skilled staff, and early-morning engine noise is unwelcome around the clubhouse and nearby homes. Here we show where our machines work on the course and which tasks they take on throughout the year.
Where our machines work on the course
On most courses, greens, approaches and fairways are maintained with specialised cylinder mowers. Our machines take care of the many other areas: semi-rough and rough, banks around bunkers, ponds and ditches, meadows and biodiversity areas, paths, car parks and the maintenance yard. On top of that come soil care, transport and winter maintenance. It is precisely these jobs that tie up a lot of staff and machine time.
Raymo Robot: semi-autonomous on banks and in the rough
Steep bunker faces and pond edges are among the least popular jobs in greenkeeping. With a ride-on mower they are risky, and with a brush cutter they take hours. The Raymo Robot is a remote-controlled, all-electric mower with all-wheel drive that can also work semi-autonomously. It handles slopes of up to 45° with ease.
Using GNSS, it stores areas once they have been defined. It mows reliably even without N-RTK correction data, so signal dropouts don’t slow it down. On the next maintenance run, an operator starts the mowing job at the push of a button and supervises it with the remote control instead of steering every pass. A radar on the bonnet detects obstacles and stops the machine. The operator doesn’t stand on the slope but at a safe distance.
Because the drive is all-electric, the Raymo Robot can work early in the morning and even during play without disturbing golfers, the clubhouse, hotel guests or neighbours. When the battery runs low, it is swapped for a charged one on site, so there’s no need to drive to a charging station. Cutting height can be set between 20 and 100 mm, and depending on the cutting deck, it maintains rough, meadows or long grass.
The Raymo Robot is available to order from us now.
AllTrec 7510F: all-electric mowing for a full day
Many clubs set themselves environmental targets and want to switch their mowing from diesel to electric. The most common concern: will the battery last until the end of the working day? That is exactly what the AllTrec 7510F is designed to deliver. The all-electric mower is built to last a full working day without recharging. It mows much more quietly, with less vibration and with zero local emissions. The AllTrec 7510F is currently undergoing long-term testing. It will be priced on a par with comparable diesel machines. Thanks to significantly lower running costs, however, it will soon prove to be the more economical solution. We’ll keep you posted on the launch date.
SF front mowers: high output with grass collection
Where large areas need a clean cut and the clippings need to be collected, our SF front mowers come into their own, for example in the semi-rough, in the rough or when collecting leaves in autumn. The SF5 holds up to 1,300 litres of clippings and high-tips them from up to 2.20 m directly into a container or trailer. That saves trips to the compost area. This also matters on meadows and low-nutrient areas: the clippings have to be removed there so the sward doesn’t become matted and stays species-rich.
ISEKI TG6: the tool carrier for the whole year
On a golf course, a tractor has to do far more than mow. The TG6 works with proven attachments from established manufacturers, such as Verti-Drain or Wiedenmann aerators and Rink or Toro top dressers. Add to that rough and meadow maintenance, sweeping and transport, and in winter it clears paths and car parks. This keeps the machine busy all year round, so it doesn’t sit idle in the shed in the off-season.
From 2027: electric transporters from TYN-e
Sand for bunkers and top dressing, tools, flags, clippings: there’s always something being moved around the course, often within earshot of golfers. From 2027, the all-electric small transporters of our new brand TYN-e will join our range.
Depending on model and body, they offer payloads of 580 to 1,350 kg and reach top speeds of 80 to 85 km/h. Standard equipment includes air conditioning, heating, a reversing camera, a touchscreen with Bluetooth, ABS and power steering. The largest model, the TX7, is homologated as an N1 commercial vehicle and can be recharged in around an hour using DC fast charging.
For courses with a high daily transport volume, this is above all an economic decision: energy costs per kilometre are generally lower than for a diesel vehicle, and maintenance requirements for electric drives are lower overall. A side effect that golfers and neighbours will appreciate: the vehicles are much quieter than vehicles with combustion engines.
Advice, demonstrations and on-site service
The best way to find out which machine suits your course is to talk to one of our dealers near you. They will advise you, arrange demonstrations right on your course and take care of maintenance and repairs. In North Rhine-Westphalia, our own Field Service even repairs electric vehicles on site at your premises.
Request a demonstration or more information → https://www.iseki.de/kontakt (https://www.iseki.de/kontakt)


