New IMG Technology 2026: Goupil G4+, Canycom CMX2414HCED, front PTO & AllTrec

Four technical innovations for grounds maintenance 2027 Efficiency often determines the success of a working day for municipalities and landscaping companies. With four technical innovations, ISEKI-Maschinen GmbH is responding specifically to current market demands: a powerful electric utility vehicle with N1 homologation, a newly developed front PTO for compact tractors, a new high-grass mower for the German market, and an exclusive preview of a new solution in emission-free mowing technology. Goupil G4+: The next level of electric utility vehicles Starting in November 2026, the Goupil G4+, the evolution of the proven electric utility vehicles, will hit the market. Compact dimensions and maneuverability remain typical for the brand, but the range of applications is growing noticeably: More payload, more range in operation: Thanks to full N1 homologation, the G4+ offers a payload of 1,235 kg. The top speed of 70 km/h also makes it ready for overland trips and expressways. Car safety standards in a utility vehicle: Equipped as standard with ABS, ESP, and hill start assist, the G4+ ensures maximum directional stability and braking control – even when fully loaded. 30 years of experience in e-utility vehicle construction: Since 1996, the team in southwestern France has been developing and producing electric utility vehicles as true work tools. The G2, G4, and G6 models can be individually adapted for public authorities, industry, logistics, and the last mile. Since 2011, Goupil has been part of the Polaris Group and is now in use in over 40 countries. In Germany, ISEKI-Maschinen GmbH distributes the vehicles exclusively. Motor-driven front PTO for TM, TG, and TH: A core problem solved For the diesel compact tractors of the TM, TG, and TH series, ISEKI-Maschinen GmbH has introduced an in-house development that sets new standards in implement compatibility: a variable, motor-driven front PTO. The core of the innovation lies in the variable front PTO gearbox. Depending on requirements and the existing implement fleet, the tractor can be equipped with the appropriate gearbox – available options include 2,000 rpm (right), 1,000 rpm (left), or 2,000 rpm (left). What this means in practice: Continue using existing implement fleets: Municipalities and landscaping companies are no longer dependent on tractor-specific attachments. Up to three attachment areas can be used simultaneously depending on the total axle load – front engine PTO, mid-mount PTO, and rear PTO, the latter available as standard in the fuel-efficient 540 ECO variant. Vehicle-close geometry: Lifting and kinematics are optimized so that the attachment is guided particularly close to the tractor. This improves weight distribution, relieves the front axle, increases driving stability, and enables a more compact, maneuverable design. The advantage of the motor-driven front PTO is demonstrated by the example of our TM4, which we are taking to GaLaBau 2026: 3 fixed speeds to choose from: When configuring the machine, you can choose from 3 fixed PTO speeds. This allows the tractor to perfectly match the requirements of various attachments and third-party brands. Year-round all-round use: Whether a mower deck in summer or a sweeper and snow blade in winter service – the tractor covers the entire application spectrum of year-round operation without time-consuming retrofitting. No dismantling of the mower deck: While a mid-mount mower would normally have to be removed for other work, which is time-consuming, it simply remains mounted in this combination. You can switch directly between mowing operation and front implement use without wasting valuable working time on dismantling. The principle behind it: The tractor adapts to the implement fleet – not the other way around. This creates investment security for companies that have already invested in existing attachments. Canycom CMX2414HCED: New high-grass mower for the German market With the CMX2414HCED, Canycom is launching a version of its high-grass mower specially further developed for the German market. Compared to the predecessor model, work was primarily done on ergonomics, safety, and off-road capability: More comfort for tall drivers: The frame has been extended by 110 mm compared to the predecessor model CMX2402, and the seating position is designed for an average body height of 180 cm. This ensures that the seating posture remains fatigue-free even on long working days. Certified safety in detail: A foldable roll-over protection structure (ROPS) certified according to ISO 21299:2009 ensures additional safety with high flexibility during transport and when working under low branches. This is complemented by a Grammer seat with pantograph suspension, a car-style seat belt, and a tilt warning system that provides visual and acoustic warnings starting from a 35° slope inclination. More performance off-road: A ground clearance increased to 150 mm, new 19-inch rear wheels, and 20% smoother steering noticeably improve off-road capability. At the same time, the working speed increases: The area output grows from 7,300 to 7,700 m² per hour. AllTrec: Prototype at GaLaBau 2026 With AllTrec, ISEKI-Maschinen GmbH already exclusively distributes the FPS Electric B.V. brand for professional, emission-free mowing technology on the German and Austrian markets. The machines are designed from the ground up to be 100% electric – without the compromises of a retrofit. FPS Electric B.V. has established itself as a reliable solution provider for electric utility vehicles since 2018. Thanks to integrated system control, the machines can be used year-round, are robust, and are designed for the highest professional requirements. At GaLaBau 2026, ISEKI-Maschinen GmbH, together with AllTrec, will show for the first time the prototype of the new 7510F – an electric front mower specially developed for professional mowing operations, which complements the existing AllTrec series alongside the versatile 8015F tool carrier. The 7510F is powered by a 50 kWh LFP battery designed for a full working day and is available with rear-discharge mower decks in working widths of 152 cm and 183 cm – suitable for a wide range of area requirements. Conclusion: Efficiency and sustainability as a common thread Whether an electric utility vehicle, an in-house mechanical development, a new high-grass mower, or a new solution for emission-free mowing technology – all four innovations pursue the same goal: more efficiency and flexibility in the daily use of municipalities and landscaping companies, while consistently focusing on sustainable drive solutions. All four innovations can be experienced live and in action at the ISEKI stand at GaLaBau 2026 in Nuremberg (September 15–18). You can find us in Hall 6 at stand number 6-111.